79
A
J
UNCTION BOX
B
C
OVER OF THE JUNCTION BOX
C
S
ECURING PLATE
4.
Locate the terminal (
D
) of the illuminant connection cable (
E
) in the junction box
and disconnect it (s. fig. below).
D
T
ERMINAL OF THE ILLUMINANT CONNECTION CABLE
E
I
LLUMINANT CONNECTION CABLE
5.
Carefully press the spring clips (
F
) on both sides of the LED illuminant (
G
) inwards
using your hand (s. fig below on the left). Simultaneously push the LED illuminant
(
G
) downwards out of its holder (
H
/ s. fig. below on the right). You can also use a
flathead screwdriver for this purpose (s. fig. below on the left). Be very careful when
doing this.
6.
Then carefully pull out the illuminant connection cable (
E
) slightly (s. fig. below on
the right).
