75
❖
Do not
use any abrasive detergents!
❖
Do not
use any alkaline dishwasher-detergents! (pH more than 7).
C
LEANING INTERVAL FOR ALUMINIUM GREASE FILTERS
➢
Every
2 - 3 weeks
according to the frequency of use of the extractor hood.
H
OW TO DEINSTALL
/
INSTALL THE ALUMINIUM GREASE FILTERS
1.
Lift the glass cover (
A
) of the extractor hood to open the appliance (s. fig. below,
direction of arrow). Behind the glass cover is the aluminium grease filter.
2.
Press the locking button (
B
) on the handle (
C
) of the grease filter (
D
) to release the
grease filter from its lock (s. fig. below). Then remove the grease filter (
D
) and clean
it as described in this chapter.
A
G
LASS COVER OF THE EXTRACTOR HOOD
B
L
OCKING BUTTON OF THE GREASE FILTER
C
H
ANDLE OF THE GREASE FILTER
D
A
LUMINIUM GREASE FILTER
3.
To reinstall the cleaned aluminium grease filter, insert the grease filter properly into
the corresponding slots on the extractor hood. Press and hold the locking button
(
B
) on the grease filter handle (
C
) while pushing the grease filter into its proper
position. Once the grease filter is properly in position, release the locking button (
B
)
to lock the grease filter in place (s. fig. below).
