78
6.3 Replacing of the illuminant
WARNING!
The LED illuminant must be replaced by a competent person
only
.
Do not
carry out the replacement of the illuminant yourself. If the LED
illuminant is damaged, please contact a
qualified professional
(electrical
engineer):
not covered by the guarantee
.
WARNING!
Switch off the appliance and disconnect it from the mains
before you replace the illuminant (use the relevant fuse in your household
fuse box).
NOTICE!
Do not touch the illuminant with your hands. The sweat on your
fingers will reduce the operating time of your new illuminant. Use a thin cloth
or a thin glove.
I
NSTRUCTIONS FOR THE QUALIFIED PROFESSIONAL
(
ELECTRICAL ENGINEER
)
1.
The LED illuminant should have
cooled down
before you remove it.
2.
Open the extractor hood and remove the aluminium grease filter (s. chapter 6.1
C
LEANING OF THE GREASE FILTERS
).
3.
Locate the junction box (
A
). Unscrew and remove the cover (
B
) of the junction box
(s. figure below).
If the junction box has a securing plate (
C
) that presses down the illuminant
connection cable to hold it in position, the securing plate must also be uninstalled (s.
fig. below).
