Pixsys PL260, User Manual

Page: 7 / 72

7
1.3 Main hardware features
Hardware
Power-supply
12...24 Vdc 6VA
Analogue inputs
AI1..AI4
Voltage 0-10V (resolution 10 bit)
Voltage 0-10V (resolution 16 bit)
Voltage 0-1V (resolution 16 bit)
Voltage 0-20mV (resolution 16 bit)
Current 0-20mA (resolution 16 bit)
Current 4-20mA (resolution 16 bit)
Thermocouple K, S, T, R, J, E
Input PT100, NI100 (2 or 3 wires)
Input NTC-10K =
β 3435
Input PT1000, PT500, PTC-1K
Encoder inputs
1
I1/A1÷I2/B1
Inputs PNP (0-24VDC) or 1st input for
bidirectional encoder (25 KHz)
I3/A2÷I4/B2
Inputs PNP (0-24VDC) or 2nd input for
bidirectional encoder (25 KHz)
Fast count inputs
2
I1,I2,I15,I16,
I3 Input PNP (0-24VDC) or fast count
inputs.
Digital inputs I1÷I16 Inputs PNP (0-24VDC)
Digital outputs Q1÷Q16
Static outputs: 24Vdc - 0,7A max.
Each output can produce 0.7A with a
combined limit of 4.0A.
Analogue outputs
AQ1÷AQ2 Voltage 0-10V (resolution 8 bit)
AQ3÷AQ4 Voltage 0-12,5V (resolution 14 bit)
Serial ports
COM1
RS485 available on terminal block
(A,B,C) and on COM plug-8 poles
(galvanically isolated).
EXP1
RS232 available on terminal block (non
isolated). CAN bus for I/O expansion.
COM2
RS232 available on COM plug-8 poles
(non isolated).
1
First encoder input uses hardware inputs I1 and I2. Second encoder input
uses hardware inputs I3 and I4. If encoder inputs are used, the relevant
digital inputs are not available. Max. frequency for encoders is 25 KHz if not
used contemporarily, 15 KHz if both inputs are used contemporarily.
2
On PL260-12AD.