Pixsys ATR144, User Manual

Page: 58 / 93

58 - ATR144 - User manual
digital input 1 is active.
d.i. 2
Digital Input 2. Active when
digital input 2 is active.
rEM.
Remote. The alarm is enabled
by the word 1220
P.aux
Auxiliary 1 for cycle (programmer
version only)
63
A.I.5.o.
Alarm 1 State Output
Alarm 1 output contact and intervention type.
n.o. St.
(N.O. Start) Normally open,
active at start (
Default
)
n.c. St.
(N.C. Start) Normally closed, active at start
n.o. tH.
(N.O. Threshold) Normally open,
active on reaching alarm
2 p. 86
n.c. tH.
(N.C. Threshold) Normally closed,
active on reaching alarm
2 p. 86
64
a.1.Hy.
Alarm 1 Hysteresis
Alarm 1 hysteresis
-9999..+9999 [digit
1 p. 86
] (degrees.tenths for temp.
sensors). Default 0.5.
65
A.1.L.L.
Alarm 1 Lower Limit
Lower limit selectable for the alarm 1 setpoint.
-9999..+30000 [digit
1 p. 86
] (degrees.tenths for temp.
sensors). Default 0.
66
A.1.u.L.
Alarm 1 Upper Limit
Upper limit selectable for the alarm 1 setpoint
-9999..+30000 [digit
1 p. 86
] (degrees.tenths for temp.
sensors). Default 1750.
67
a.1.re.
Alarm 1 Reset
Alarm 1 contact reset type
A. rEs.
Automatic reset (
Default
)