72 - ATR144 -
User manual
129
nFc.L.
NFC Lock
Disables NFC capabilities
diSAb.
NFC lock Disabled: behaviour, the device
can be programmed via NFC using the
MyPixsys smartphone app. (
Default
)
EnAb.
NFC lock Enabled: NFC protection active,
the device will ignore any configuration
update written through nfc.
130
s.k.s.f.
Set key special functions
diSAb.
No special function linked to
the
SET
key. (
Default
)
st./st.
Start/Stop. Pressing
SET
key the controller
switches from Start to Stop and vice versa.
Status of the controller, upon power-up,
depends on parameter 30
ini.s.
2t.swi.
2 Threshold Command Setpoint Switch.
3t.swi.
3 Threshold Command Setpoint Switch.
4t.swi.
4 Threshold Command Setpoint Switch.
A.i. 0
Analogue Input 0. Set AI to zero
131÷140
Reserved Parameters - Group I
Reserved parameters - Group I.
12.j
GROUP J -
Lo.br.
- Loop Break
141
L.b. .S.
Loop Break State
diSAb.
Loop break disabled. (
Default
)
autom.
Loop break enabled with automatically
calculated time and band.
manu.
Loop break enabled with time (par.
Lb. t.
)
And band (par.
Lb. b.
) entered by the user.
142
L.b. t.
Loop Break Time
Sets the maximum time span allowed for a process
variation to occur before the loop break error is
triggered. The minimum delta variation considered is
set in P_143 (
L.b. b.
)
00:01..99:59 mm:ss.
Default
: 02:00 mm:ss.