31
/124
31
/56
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
Translated from Italian
3
SAFETY INSTRUCTIONS
3.1 SAFETY WARNINGS
Mains - prelimi-
nary checks be-
fore installation
ATTENTION
You must avoid any contact between the electrical power supply and the fluid that
needs to be FILTERED.
Maintenance
control
Before any checks or maintenance work are carried out, disconnect the power source.
FIRE AND
EXPLOSION
When flammable
fluids are present
in the work area,
such as gasoline
and windshield
wiper fluid, be
aware that flam-
mable fumes can
ignite or explode.
To help prevent fire and explosion:
Use equipment only in will ventilated area.
Keep work area free of debris, including rags and spilled or open containers of solvent
and gasoline.
Do not plug or unplug power cords or turn lights on or off when flammable fumes are
present.
Ground all equipment in the work area.
Stop operation immediately if static sparking occurs or if you feel a shock. Do not use
equipment until you identify and correct the problem.
Keep a working fire extinguisher in the work area.
ELECTRIC
SHOCK
Electrocution or
death
F
This device must be grounded. Improper grounding setup or usage of the system can
cause electric shock.
Turn off and disconnect power cord before servicing equipment.
Connect only to a grounded electrical outlets.
Ensure ground prongs are intact on power and extension cords.
Outdoors, use only extensions suitable for the specific use, in accordance with the regula-
tions in force.
The connection between plug and socket must remain away from water.
Never touch the electric plug of socket with wet hands.
Do not turn the device on if the power connection cord or other important parts of the
apparatus are damaged, such as the inlet outlet plumbing, dispensing nozzle or safety
devices. Replace damaged components before operation.
For safety reasons, we recommend that, in principle, the equipment be used only with a
earth-leakage circuit breaker (max 30 mA).
Electrical connections must use ground fault circuit interrupter (GFCI).
Installation operations are carried out with the box open and accessible electrical
contacts. All these operations have to be done with the unit isolated from the power
supply to prevent electrical shock!
Summary of Contents for K900
Page 27: ...M0158B ITEN 54 56 Installation use and maintenance ...
Page 28: ......
