background image

M0158B  ITEN 

30

 

/56

Installation, use and maintenance

FACSIMILE COPY OF EU DECLARATION OF CONFORMITY

The undersigned: PIUSI S.p.A.

 

         Via Pacinotti 16/A  z.i. Rangavino  -  46029 Suzzara - Mantova - Italy

HEREBY STATES under its own responsibility that the equipment described below:

Description : 

METER

Model: K900

Serial number: refer to Lot Number shown on CE plate affixed to product

Year of manufacture: refer to the year of production shown on the CE plate affixed to the product

complies with the following legislation:

- Electromagnetic compatibility

The technical file is at the disposal of the competent authority following motivated request at PIUSI S.p.A. or fol-

lowing request sent to the e-mail address:  [email protected].

THE ORIGINAL DECLARATION OF CONFORMITY IS PROVIDED SEPARATELY WITH THE PRODUCT

GENERAL WARNINGS

Important 

precautions

To ensure operator safety and to protect the pump from potential damage, workers 

must be fully acquainted with this instruction manual before performing any operation. 

Symbols used in 

the manual

The following symbols will be used throughout the manual to highlight safety informa-

tion and precautions of particular importance:

ATTENTION

This symbol indicates safe working practices for operators and/or potentially ex-

posed persons.

WARNING

This symbol indicates that there is risk of damage to the equipment and/or its com-

ponents.

NOTE

This symbol indicates useful information.

Manual 

preservation

his manual should be complete and legible throughout. It should remain available to 

end users and specialist installation and maintenance technicians for consultation at 

any time.

Reproduction 

rights

This manual belongs to Piusi S.p.A., which is the sole proprietor of all rights indicated by ap-

plicable laws, including, by way of example, laws on copyrights. All the rights deriving from 

such laws are reserved to Piusi S.p.A.: the reproduction, including partial, of this manual, its 

publication, change, transcription and notification to the public, transmission, including us-

ing remote communication media, placing at disposal of the public, distri¬bution, marketing 

in any form, translation and/or processing, loan and any other activity reserved by the law 

to Piusi S.p.A..

Summary of Contents for K900






























Reviews: