51
/124
51
/60
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
Translated from Italian
Gal
Qts
Pts
Gal
RESET
RESET
RESET
4
CAL
CAL
CAL
By pressing the CAL key at length, the new settings will be stored, the
METER will pass through the start cycle and will then be ready to dispense
in the set units.
ATTENTION
The Reset Total and Total registers will be automatically changed to
the new unit of measurement.
NO new calibration is required after changing the Unit of Measurement.
L2
(OPTIONAL) PULSE TRANSMITTER (PULS OUT)
For the models in which the function is available, there is an “Open Collector” type “Puls Out” output, which
emits 10 impulses per Unit of Measurement of the partial quantity that is dispensed. The number of pulses
per unit is fixed and it is set to 10 p\unit.
By connecting the Puls OUT output to a Display Repeater (“Puls IN Remote Display) and connecting the
“Sync reset” output (see logical connection shown below) it is possible to synchronise the 2 counters in mea-
surement as well as in reset.
PULSER
COUNTER
K900 WITH
PULSE OUT
REMOTE
DISPLAY
PULSE IN
10 pulse/unit
Summary of Contents for K900
Page 30: ......
