M0158B IT | en
40
/60
Installation, use and maintenance
G DAILY USE
FOreWOrD
The only operations that need to be done for daily use are partial and/or resettable
total register resetting. The user should use only the dispensing system of K900. Oc-
casionally the meter may need to be configured or calibrated. To do so, please refer to
the relevant chapters.
Below are the two typical normal operation displays. One display page shows the partial and reset total
registers. The other shows the partial and general total. Switchover from resettable total to general total
display is automatic and tied to phases and times that are in factory set and cannot be changed.
*
The Partial register positioned in the top part of the display indicates the
quantity dispensed since the RESET key was last pressed
*
The RESET Total register, positioned in the lower part of the display, indicates
the quantity dispensed since the last RESET Total resetting. The RESET Total
cannot be reset until the Partial has been reset, while vice versa, the Partial can
always be reset without resetting the RESET Total. The unit of measurement of
the two Totals can be the same as the Partial or else different according to the
factory or user settings.
*
The General TOTAL register (Total) can never be reset by the user. It continues
to rise for the entire operating life of the meter.
*
The register of the two totals (Reset Total and Total) share the same area and
digits of the display. For this reason, the two totals will never be visible at the
same time, but will always be displayed alternately.
*
The General Total (Total ) is shown during Meter standby
*
The Reset Total is shown:
- At the end of a Partial reset for a certain time (a few seconds)
- During the entire dispensing stage
- For a few seconds after the end of dispensing. Once this short time has
expired. Meter switches to standby and lower register display switches to
General Total
NOTe
6 digits are available for Totals, plus two icons x 10 / x100. The increment
sequence is the following:
0.0 -> 99999.9 -> 999999 -> 100000 x 10 -> 999999 x 10 ->100000 x 100 ->
999999 x 100
Summary of Contents for K900
Page 30: ......
