PITSOS GIR81000, User Manual

Page: 17 / 24

17
GIR81000-001_v01
Emptying the water reservoir
B
●
Disconnect the appliance from the power supply.
1 Release the water reservoir catch and pull the water
reservoir out.
2
Pull the water inlet out.
●
Empty the water reservoir by keeping it upside-down
above the sink.
3 Slip the water inlet in.
4
Place the water reservoir in its former position.
A characteristic “click” sound will inform you that the water
reservoir has been re-installed properly.
Additional features
AUTOMATIC SWITCH-OFF
If the steam ironing function is not used for 10 min during
the ironing, the appliance will be switched to stand-by
mode. The display backlight will be switched off and the
automatic switch-off indicator blinks on the display. It is
accompanied by continuous blinking of the red and green
pilot light on the iron. In order to continue the ironing, just
move the iron or press the
on/off button . The appliance
will be switched back to the previous settings and the iron
heats once again. Wait for ca. ½ min until the iron reaches
the temperature set before automatic switch-off.
LANGUAGE VERSION SELECTION
1
Unwind and straighten the connection cable and the
power cord.
2 Start the appliance (see: Starting the appliance).
You can select one of 3 language versions:
English, French or German.
3 In order to select a language version, press at the same
time the water hardness selection button and the
fabric and steam emission selection button “ ”. You
will see the actual language version symbol displayed on the
LCD display (EN, FR, DE).
4 Use the fabric and steam emission selection button
“ ” in order to select the desired language version.
Available language versions will be displayed in the following
way:
5 If the language version you have chosen appears
on the display, wait for a moment. The appliance will be
automatically switched to the selected language version and
then will return to the main screen.
6 If you want to achieve better effects, shift left the steam
emission regulator to the position – this will bring you
increased steam emission speed.
7
The appliance is ready to use.
8 Keep the iron in a vertical position ca. 4 in (10 cm) away
from the fabric for a moment.
9
Press once the steam emission button – steam is
emitted in large quantities from the openings located in the
front part of the iron.
10 If the folds are large, wait for a moment and press the
steam emission button once again. Most of folds can be
removed completely if you repeat this operation 3 times.
11 In order to initiate steam emission it may be necessary to
press the steam emission button several times.
12 As soon as you have finished the ironing, set the steam
emission level to ” ” by pressing the fabric and
steam emission selection button “ ”.
13 Press the on/off button in order to switch off the
appliance.
14 Disconnect the steam generator from the power supply.
15 As soon as the iron is cooled down completely,
empty the water reservoir and store it in a safe place in
a horizontal position.
In order to preserve high quality of steam do
not press the steam emission button more
than 3 times after the pilot light has been
switched off.
The appliance emits steam at a high
temperature. Do not iron any clothes or fabrics
that are being worn by people or animals. Do
not direct the steam towards people or animals.
While ironing, keep the distance of several
centimetres from delicate fabrics (such as
synthetic fibre, silk or velvet), otherwise the
fabric may be damaged.
AS SOON AS YOU FINISH THE IRONING
●
During breaks in ironing and when the ironing is finished,
place the iron on the steam generator soleplate with
thermal insulation.
●
Press the on/off button in order to switch off the
appliance.
●
Disconnect the steam generator from the power supply.
●
As soon as the iron is cooled down completely, empty
the water reservoir and store it in a safe place in
a horizontal position.