Page
22
of
33
NOTE:
Install the shorter spring to the starboard side and longer spring to the port side rudder
pedals.
Figure 12-004: Upper insert and PVC tube installation.
j. Make sure the angle is correctly oriented (Figure 12-005).
k. Mark 45 mm aft of the installed insert. (Figure 12-005 – middle figure).
l. Position the pedals to the fwd most position and run the braided cable through the
lower PVC tube, through spring and back into the cabin through the upper PVC tube.
Figure 12-005: Springs fastening material and braided wire handle installation.
m. Tension the braided wire so it is not too lose and mark at the mark from step 12-k.
