Page
6
of
33
s.
Take measure of the distance between engine mount reinforcements on the firewall
(port and starboard side) and the fwd fuselage edge. See Figure 00-003. The
measured value will be a reference at firewall inserts installation.
t.
Make a template out of a cardboard or similar material, in the shape of a firewall. Try
to pull the damaged material in its original form, place the template on the firewall
and mark all the bolts and holes on the firewall for later re-installation (See
Modification 13).
Figure 00-003: Measuring the distance between engine mount reinforcements
on the firewall and the fwd fuselage edge.
Modification 1 – FUSELAGE BELLY REMOVAL
a. Turn the aircraft upside-down.
b. Follow 32-10: 2.1.3. MLG strut removal in [2].
c. Perform steps 14 to 19 in [4].
NOTE:
For torque values throughout this document refer to standard torque values stated in
20-30 in [2], u nless differently stated in this document.
