Pioneer VSX-LX503 Instruction Manual Download Page 129

Page: 129 / 174

129

≫

≫

≫

≫

≫

≫

Setting Item

Default Value

Setting Details

Fixed PCM

Off

Select whether to fix input signals to PCM (except

multi-channel PCM) when you select "HDMI",

"COAXIAL", or "OPTICAL" in the "Audio Select"

setting. Set this item to "On" if noise is produced or

truncation occurs at the beginning of a track when

playing PCM sources. Select "Off" normally.

• Each time the "Audio Select" setting is changed,

the setting is restored to "Off".

• The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is

selected.

Hardware

HDMI

Change the settings of the HDMI function.

Setting Item

Default Value

Setting Details

HDMI CEC

Off

Setting this to "On" enables the input selection link

and other link functions with HDMI-connected CEC-

compatible device.

"On": When this function is used

"Off": When this function is not used

When this setting is changed, turn off and then on

again the power of all connected devices.

• Depending on the TV to use, a link setting may

be required on the TV.

•

This function is effective only when the device is

connected to the HDMI OUT MAIN terminal.

• Setting this to "On" and closing the operation

screen will display the name of the connected

CEC-compatible device and "CEC On" on the

main unit’s display.

• When this is set to "On", the power consumption

in standby mode may increase. (Depending

on the TV status, the unit will enter the normal

standby mode.)

• If you operate the MASTER VOLUME dial on the

main unit when this setting is "On" and audio is

output from the TV speakers, audio will be output

also from the speakers connected to this unit. To

output audio from only either of them, change the

setting of this unit or TV, or reduce the volume of

this unit.

• If abnormal behavior is observed when this is set

to "On", set it to "Off".

• If a connected device is not CEC-compatible, or

if you are not sure whether it is compatible, set

it to "Off".

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands