Pioneer VSX-LX503 Instruction Manual Download Page 33

Page: 33 / 174

≫

≫

≫

≫

≫

≫

❏

Combination example when Top Front

Speakers are used at the front

About the top front speakers

*1: 30° to 55°

The top front speakers are installed on the ceiling at front of the listening

position, and the width between the left and right speakers is optimal to match

the one for the front speakers. When the top front speakers are used in front, the

combination of the height speakers at the rear can be selected from the following

4 examples shown at the right.
9,10 Top Front Speakers

(Example 1) Use top rear speakers at the rear

*2: 125° to 150°

The top rear speakers are installed on the ceiling at rear of the listening position,

and the width between the left and right speakers is optimal to match the one for

the front speakers.
11,12 Top Rear Speakers

(Example 2) Use rear high speakers at the rear

3´ (0.9 m)

or more

The width between the rear high speakers should match the one for the front

speakers, and they should be installed minimum of 3’/0.9 m higher than the front

speakers, and tilted so they will point toward the listener.
11,12 Rear High Speakers

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands