Pioneer VSX-LX503 Instruction Manual Download Page 19

Page: 19 / 174

≫

≫

≫

≫

≫

≫

❏

Dolby Enabled Speakers (Dolby Speakers)

Installation Example

*1: 22° to 30°, *2: 120°

This is a system with the basic 5.1 channel system (

p14

) consisting of front

speakers, a center speaker, surround speakers and a powered subwoofer, and

added Dolby enabled speakers (front) or Dolby enabled speakers (surround)

combined. Dolby enabled speakers are special speakers designed to face the

ceiling, so that the sound is heard from overhead by bouncing the sound off the

ceiling. By installing such height speakers, when the input format is Dolby Atmos,

you can select the Dolby Atmos listening mode which realizes the most up-to-

date 3D sound including overhead sound.

Install them either on the front speakers or on the surround speakers.

7,8 Height Speakers

Choose one of the following:

• Dolby Enabled Speakers (Front)

• Dolby Enabled Speakers (Surround)

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands