Pioneer VSX-LX503 Instruction Manual Download Page 27

Page: 27 / 174

≫

≫

≫

≫

≫

≫

❏

Combination example when Top Middle

Speakers are used at the front

About the top middle speakers

*1: 65° to 100°

The top middle speakers are installed on the ceiling immediately above the

listening position, and the width between the left and right speakers is optimal to

match the one for the front speakers. When the top middle speakers are used in

front, the rear high speakers in the figure at the right can be used at the rear.
7,8 Top Middle Speakers

Use rear high speakers at the rear

3´ (0.9 m)

or more

The width between the rear high speakers should match the one for the front

speakers, and they should be installed minimum of 3’/0.9 m higher than the front

speakers, and tilted so they will point toward the listener.
9,10 Rear High Speakers

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands