Pioneer VSX-LX503 Instruction Manual Download Page 151

Page: 151 / 174

151

≫

≫

≫

≫

≫

≫

Updating the Firmware via Network

• Check that the unit is turned on, and the connection to the Internet is secured.

•

Turn off the controller components (PC etc.) connected to the network.

• Stop any playing Internet radio, USB storage device, or server content.

•

If the multi-zone function is active, turn it off.

•

If "HDMI CEC" is set to "On", set it to "Off".

– Press to display the Home screen. Next, select "System Setup" -

"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "Off".

The descriptions may differ from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Press .

The Home screen is displayed on the TV screen.

2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

NET" with the cursors in order, then press ENTER.

• If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

•

If there is no updatable firmware, "Update via NET" cannot be selected.

3. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

• When "Completed!" is displayed, the update is complete.

4. Press STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your firmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "





Error!" is displayed on the display of the unit. ("



represents an alphanumeric character.) Refer to the following descriptions and

check.
Error Code

•



-01,



-10:

LAN cable not found. Connect the LAN cable properly.

•



-02,



-03,



-04,



-05,



-06,



-11,



-13,



-14,



-16,



-17,



-18,



-20,



-21:

Internet connection error. Check the following:

– Whether the router is turned on

– Whether this unit and the router are connected via the network

Unplug and plug the power cords of this unit and the router. This may solve

the problem. If you are still unable to connect to the Internet, the DNS server

or proxy server may be temporarily down. Check the server operation status

with your Internet service provider.

Summary of Contents for VSX-LX503















































































































































































Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands

Pioneer VSX-LX503, Instruction Manual

Search results

Summary of Contents for VSX-LX503

Reviews:

Related manuals for VSX-LX503

Brands by name

Popular brands