Pioneer VSX-934 Instruction Manual Download Page 79

Page: 79 / 153

≫

≫

≫

≫

≫

≫

Settings that can be registered

The following settings can be registered with PERSONAL PRESET.

–

Input selector (Network service or AM/FM radio stations can also be

registered.)

– Listening mode

–

Volume level (Upper limit "-32 dB")

(When ZONE 2 is on, the volume level of ZONE 2 is also registered.)

– Output destination (Multi Zone)

–

Sound Retriever function's "On" and "Off"

–

TREBLE/BASS/DIALOG, etc.

* When AM/FM radio stations are registered, TUNER's preset numbers "38",

"39" and "40" (

p72

) are overwritten.

Using the registered settings

Press any of the 1 to 3 buttons of PERSONAL PRESET with which settings

have been registered.

•

Pressing PERSONAL PRESET buttons turns the power on even if the main

unit is in standby mode.

Checking the registered settings

1. Press

to display the Home screen, select "System Setup" - "Input/Output

Assign" - "PERSONAL PRESET Information" (

p105

), and press ENTER.

2. The registered settings are displayed in the list.

• Some of the items such as the Sound Retriever function are not displayed

in the list.

Summary of Contents for VSX-934


























































































































































Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands

Pioneer VSX-934, Instruction Manual

Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands