Pioneer VSX-934 Instruction Manual Download Page 68

Page: 68 / 153

≫

≫

≫

≫

≫

≫

Connecting your Unit to a Sonos System

Once your unit is connected to the Sonos Connect you will be able to send any

music or source on your Sonos App to the unit. By going through the Sonos

Connect, you can play your unit through other Sonos devices in the network in

the same group, or you can just play on your unit. Further, the power of your

unit turns on automatically when music starts playing on the Sonos App, and the

linked function to switch input works.

•

If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "Off " in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function

(

p115

) is set to On.

Required Equipment

• Sonos Connect

•

RCA Audio Cable (Supplied with Sonos Connect)

Connecting your Unit to Sonos Connect

Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA

cable supplied with the Sonos Connect. Any input can be used other than the

PHONO input.

•

You can also connect with a digital cable. For details, refer to the instruction

manual of the Sonos.

•

You can rename the input that is displayed on the unit to a more logical

name. For example, you can change the name of input that the Sonos

Connect is plugged into from "CD" (or other input) to "SONOS". Press the

button on the remote controller to display the Home screen, and select

"System Setup" - "Source" - "Name Edit" to change the name.

Setting up your Unit to work with the

Sonos Connect

A setup is required to play Sonos on this unit. Make the setting according to the

following procedure.

1. Press the

button on the remote controller to display the Home screen,

select "System Setup" - "Hardware" - "Works with SONOS", and press the

ENTER button.

Select the following items with the cursors

/ and set each item.

Input Selector:

Enable the interlocking function with the Sonos Connect. With the cursors

, select the input selector to which the Sonos Connect is connected.

Connected Device:

Press the ENTER button to display Sonos devices connected to the same

network as the network of this unit. Select the Sonos Connect connected to

the unit and press the ENTER button.

•

Products (e.g. Play:3 unequipped with an output terminal) other than the

Sonos Connect are also displayed in the device list and selectable. In

that case, when playback on the Sonos side starts, the input is switched,

however, audio is not output. Select the room name of the connected

Sonos Connect.

• Up to 32 devices can be displayed on the Sonos product list screen. If you

cannot find the Sonos Connect to be interlocked, return to the previous

screen, turn off the product you want to interlock, and try again.

Output Zone:

With the cursors /

, select the ZONE where you want to listen to the music.

"Main": Outputs audio only to the main room (where this unit is located).

"Zone 2": Outputs audio only to the separate room (ZONE 2).

"Main/Zone 2": Outputs audio to both the main room and separate room.

Summary of Contents for VSX-934


























































































































































Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands

Pioneer VSX-934, Instruction Manual

Search results

Summary of Contents for VSX-934

Reviews:

Related manuals for VSX-934

Brands by name

Popular brands