Pioneer VSX-1131 Basic Manual Download Page 64

Page: 64 / 92

> Specifications

> Settings

> Listening Modes

> Playback Function

> Basic Manual

Troubleshooting

Appendix

•

Make sure to copy the unzipped files.

4. Connect the USB storage device to the USB port of the

unit.

•

If you connect a USB hard disk drive to the USB

port of the unit, we recommend that you use its AC

adapter to power it.

•

If the USB storage device has been partitioned,

each section will be treated as an independent

device.

5. Press on the remote controller.

The Home screen is displayed on the TV screen.

6. Select "System Setup" - "Miscellaneous" - "Firmware

Update" - "Update via USB" with the cursors in order,

then press ENTER.

System Setup

•

If "Firmware Update" is grayed out and cannot be

selected, wait for a while until it starts up.

•

You will not be able to select "Update via USB" if

there is nothing to update.

7. Press ENTER with "Update" selected to start update.

•

During the update, the TV screen may go black

depending on the updated program. In that case,

check the progress on the display of the unit. The

TV screen will remain black until the update is

complete and the power is turned on again.

•

During the update, do not turn off, or disconnect

then reconnect the USB storage device.

•

"Completed!" is displayed when the update is

complete.

8. Disconnect the USB storage device from the unit.
9. Press STANDBY/ON on the main unit to switch the

unit to standby. The process is completed and your

firmware is updated to the latest version.

•

Do not use on the remote controller.

■

If an Error Message is Displayed

When an error occurs, "

＊

＊＊

Error!" is displayed on

the display of the unit. ("

＊

" represents an alphanumeric

character.) Check the following:

Error Code

•

＊

-01,

＊

-10

：

USB storage device not found. Check whether the USB

storage device or USB cable is correctly inserted to the

USB port of the unit.

Connect the USB storage device to an external power

source if it has its own power supply.

•

＊

-05,

＊

-13,

＊

-20,

＊

-21

：

The firmware file is not present in the root folder of the

USB storage device, or the firmware file is for another

model. Retry from the download of the firmware file.

• Others

Disconnect then reconnect the AC power cord, then

repeat from the beginning.

Summary of Contents for VSX-1131





























































































Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands

Pioneer VSX-1131, Basic Manual

Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands