Pioneer VSX-1131 Basic Manual Download Page 41

Page: 41 / 92

> Specifications

> Settings

> Listening Modes

> Playback Function

> Basic Manual

Troubleshooting

Appendix

Speaker

You can make changes to the connection environment of the speakers and change the

volume level. Settings are automatically configured if you use Full Auto MCACC. This

setting cannot be selected if headphones are connected or audio is output from the

speakers of the TV.

■

Configuration

Setting Item

Default Value

Setting Details

Speaker

Channels

7.1.2 ch

Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",

"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2

ch", "6.1.2 ch", or "7.1.2 ch" to suit the number of

speaker channels connected.

Subwoofer

Yes

Set whether a subwoofer is connected or not.

"Yes": When subwoofer is connected

"No": When subwoofer is not connected

Height Speaker

Top Middle

Set the speaker type if height speakers are

connected to the HEIGHT terminals.

Select "Front High", "Top Front", "Top Middle",

"Top Rear", "Rear High", "Dolby Speaker (Front)",

"Dolby Speaker (Surr)", or "Dolby Speaker (Back)"

according to the type and layout of the connected

speakers.

•

If an item cannot be selected even though

connection is correct, check that the settings in

"System Setup" - "Speaker" - "Configuration"

- "Speaker Channels" matches the number of

connected channels.

Zone Speaker

Set the connection of speakers to Zone 2 speaker

terminals.

"Zone 2": When speakers are connected to Zone 2

speaker terminals

"No": When speakers are not connected to Zone 2

speaker terminals

•

This item will be set to "No" when the "System

Setup" - "Speaker" - "Configuration" - "Speaker

B" setting is "Yes".

Setting Item

Default Value

Setting Details

Speaker B

Set whether you will use the Speaker B system.

"No": Speaker B system will not be used

"Yes": Speaker B system will be used

•

This item will be set to "No" when the "System

Setup" - "Speaker" - "Configuration" - "Zone

Speaker" setting is "Zone 2".

•

This item will be set to "No" when the "System

Setup" - "Speaker" - "Configuration" - "Bi-Amp"

setting is "Yes".

•

If an item cannot be selected even though

connection is correct, check that the settings in

"System Setup" - "Speaker" - "Configuration"

- "Speaker Channels" matches the number of

connected channels.

Bi-Amp

Set whether the front speakers are bi-amp

connected.

"No": When front speakers are not bi-amp

connected

"Yes": When front speakers are bi-amp connected

•

This cannot be selected under the following

conditions:

– "System Setup" - "Speaker" - "Configuration"

- "Zone Speaker" is set to "Zone 2"

– "System Setup" - "Speaker" - "Configuration"

- "Speaker B" is set to "Yes"

•

If an item cannot be selected even though

connection is correct, check that the settings in

"System Setup" - "Speaker" - "Configuration"

- "Speaker Channels" matches the number of

connected channels.

Summary of Contents for VSX-1131





























































































Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands

Pioneer VSX-1131, Basic Manual

Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands