Pioneer VSX-1131 Basic Manual Download Page 78

Page: 78 / 92

> Specifications

> Settings

> Listening Modes

> Playback Function

> Basic Manual

Troubleshooting

Appendix

■

Supported Audio Formats

For server playback and playback from a USB storage

device, this unit supports the following music file formats.

Note that sound files that are protected by copyright cannot

be played on this unit.

MP3 (�mp3/�MP3)

•

Supported formats: MPEG-1/MPEG-2 Audio Layer 3

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps.

Incompatible files cannot be played.

WMA (�wma/�WMA)

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 5 kbps and 320 kbps.

Incompatible files cannot be played.

•

WMA Pro/Voice/WMA Lossless formats are not

supported.

WAV (�wav/�WAV)

WAV files include uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 64 kHz,

88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (�aiff/�aif/�aifc/�afc/�AIFF/�AIF/�AIFC/�AFC)

AIFF files include uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 64 kHz,

88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AAC (�aac/�m4a/�mp4/�3gp/�3g2/�AAC/�M4A/

�MP4/�3GP/�3G2)

•

Supported formats: MPEG-2/MPEG-4 Audio

•

Supported sampling rates: 44.1 kHz, 48 kHz, 64 kHz,

88.2 kHz, 96 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps.

Incompatible files cannot be played.

FLAC (�flac/�FLAC)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 64 kHz,

88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

Apple Lossless (�m4a/�mp4/�M4A/�MP4)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 64 kHz,

88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

•

Quantization bit: 16 bit, 24 bit

DSD (�dsf/�dff/�DSF/�DFF)

•

Supported formats: DSF/DSDIFF

•

Supported sampling rates: 2.8 MHz, 5.6 MHz

Dolby TrueHD (�vr/�mlp/�VR/�MLP)

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz,

96 kHz, 176.4 kHz, 192 kHz

•

Variable bit-rate (VBR) files are supported. However,

playback times may not be displayed correctly.

•

This unit supports the gapless playback of the USB

storage device in the following conditions.

When playing WAV, FLAC and Apple Lossless, and

the same format, sampling frequency, channels and

quantization bit rate are played continuously

Summary of Contents for VSX-1131





























































































Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands

Pioneer VSX-1131, Basic Manual

Search results

Summary of Contents for VSX-1131

Reviews:

Related manuals for VSX-1131

Brands by name

Popular brands