Using the tape deck
08
48
En
5
Press TAPE to start playback.
You can also press
(remote) or
(front
panel) to start playback when
TAPE
is
selected.
The side of the tape you’ll hear is whichever is
face up when you load it. This is the ‘forward’
(
) direction, while the other side is ‘reverse’
(
). The direction indicator is shown in the
display.
6
To play the other side of the tape,
press TAPE or
(remote only).
Each time you press
TAPE
(
) during
playback, the other side of the tape starts
playing. Pressing
TAPE
(
) when the tape is
stopped starts playback on the side it was
playing previously.
The current tape direction is indicated in the
display.
7
To skip back or forward a track on the
tape, press
or
.
On the front panel, press
or
(the tape should be playing when you do this).
searches for the next blank space
between tracks on the side currently playing
(in other words, to the start of the next track),
then resumes playback.
searches for the previous blank space
between tracks on the side currently playing
(in other words, to the start of the current
track), then resumes playback.
By pressing
or
more than once, the
tape will skip several tracks at once (up to a
maximum of 15). For example, press
twice to skip forward two tracks.
Track search is unlikely to work reliably in
the following cases:
• If the space between tracks is less than
about 4 seconds.
• If the recording is particularly noisy so the
spaces are not recognized.
• If the recording contains frequent
silences, such as a language study tape.
• If the recording contains sections of very
quiet material, such as some classical
music recordings.
8
To pause playback, press
(remote
only).
Press
TAPE
(
) to resume playback.
9
To stop playback, press
.
10 To fast wind the tape, press
or
.
On the front panel, press
or
(the tape should be stopped when you do
this).
rewinds the tape, regardless of the tape
direction at the time.
always forward-
winds the tape.
Resetting the tape counter
The tape counter display indicates the current
location of the tape. The tape counter returns
to zero automatically when you eject a tape.
To reset it manually:
•
Press
while the tape is stopped.
The counter returns to
0000
.
Changing tape displays
•
Press SYSTEM DISP (remote) or
SYSTEM DISPLAY (front panel) repeatedly
to switch between the tape displays:
Tape Counter
Clock
XV-EV51.book 48 ページ ２００３年５月６日 火曜日 午後２時３１分
