Connecting up
02
10
En
• Do not connect any of the supplied
speakers to any other amplifier. This may
result in malfunction or fire.
• Make sure that the bare speaker wires
cannot touch each other, or come into
contact with other metal parts once the
unit is switched on.
1
Twist and pull off the protective
shields on each wire.
2
Connect to the speaker terminals on
the rear of the unit.
Match the colored wire with the color-coded
label (above the tabs), then insert the colored
wire into the red (+) tab and the other wire
with the black (–) tab.
Note that the (white) colored wire from the
front left speaker has a gray line to indicate
that it should be inserted into the red (+) tab.
3
Connect the subwoofer terminals on
the rear of the unit to the rear of the
subwoofer in the same way.
Hints on speaker placement
The following guidelines will help you to get
the best performance from your speaker
system.
• Place the front left and right speakers at
equal distances from the TV.
EV61 DVD model only
• Place the center speaker above or below
the TV so that the sound of the center
channel is localized at the TV screen.
• If you choose to install the center speaker
on top of the TV, be sure to secure it with
putty, or by other suitable means, to
reduce the risk of damage or injury
resulting from the speaker falling from the
TV in the event of external shocks such as
earthquakes.
• If possible, place the surround speakers
slightly above ear level.
• Try not to place the surround speakers
further away from the listening position
than the front and center speakers. Doing
so can weaken the surround sound effect.
• To achieve the best possible surround
sound, install your speakers as shown
below. Be sure all speakers are installed
securely to prevent accidents and
improve sound quality.
XV-EV51.book 10 ページ ２００３年５月６日 火曜日 午後２時３１分
