Pioneer RMD-V3104U, Manual

Page: 17 / 201

7
GENERAL SPECIFICATIONS
CHAPTER 2. GENERAL SPECIFICATIONS
1. SPECIFICATIONS OF THE DIFFERENT UNITS
(1) Multi Projection Unit (RM-V2550BU, RM-V2550E)
TV format ............... NTSC/PAL, automatic switching
(fixed mode available)
Projection tubes .......................................... 7" CRT x 3
Horizontal resolution ..... 800 TV lines (with video input)
Brightness (at white peak) ..................... 420 ft-L (50")
Practical angle of vision 150° horizontal, 60° vertical
Input signal:
Video input
...... Standard input level (75-ohm load) 1 Vp-p
Input terminal: BNC connector x 1
Y/C isolated inputs
.................. Standard input level (75-ohm load)
Brightness (Y) signal 1 Vp-p
Color (C) signal ... 286 mVp-p (burst signal, NTSC)
300 mVp-p (burst signal, PAL)
Input terminals: BNC connectors
(one each for Y and C)
RGB input ............................ Analog R.G.B signals
(NTSC/PAL R.G.B)
RGB-1: D-Sub 9-pin terminal x 1 *2
RGB-2: BNC connector x 5 *2
R: Red input, 0.7 Vp-p ±2 dB, 75-ohm terminal,
positive polarity
G/G on SYNC: Green input, 0.7 Vp-p ±2 dB,
75-ohm terminal, positive polarity
Green input with synchronization,
1.0 Vp-p±2 dB, 75-ohm terminal, positive polarity
B: Blue input, 0.7 Vp-p ±2 dB, 75-ohm terminal,
positive polarity
HD/SYNC: Horizontal synchronization input,
0.3 to 4 Vp-p, 75-ohm terminal,
negative polarity
Composite synchronization input,
0.3 to 4 Vp-p, 75-ohm terminal,
negative polarity
VD: Vertical synchronization input, 0.3 to 4 Vp-p,
75-ohm terminal, negative polarity
Synchronizing signal frequency: Standard NTSC
or PAL frequency
EXT control: BNC connector
Remote input: Mini-jack
Auto input: 6-pin DIN connector
Output signal:
Video output .... Standard level (75-ohm load) 1 Vp-p
Outputs input signals from input terminals
Remote output ...................... 6-pin DIN connector
Computer control:
Method ........................... RS-232C (D-SUB 25-pin)
Speed ......... 1200, 2400, 4800, 9600, 19200 bps *1
Power supply voltage
for RM-V2550BU ......... AC 100V to 120V, 50/60 Hz
for RM-V2550E ............ AC 220V to 240V, 50/60 Hz
Normal power consumption
for RM-V2550BU ........................ approx. 300W *3
for RM-V2550E ........................... approx. 300W *3
Maximum power consumption
for RM-V2550BU .......................................... 400VA
for RM-V2550E ............................................. 400VA
AC outlet (Max. 8A, AC 100V to 120V)
for RM-V2550BU ................................................... 1
AC outlet (Max. 550W/A, AC 220V to 240V)
for RM-V2550E ...................................................... 1
External dimensions
.............. 1030.8 (W) x 1115 (H) x 665.2 (D) mm
(when RM-V2550S or RM-V2550 S2 fitted:)
1030.8 (W) x 1115.5 (H) x 750 (D) mm
Weight ................................................................. 74 kg
(87kg when RM-V2550S fitted)
(82kg when RM-V2550S2 fitted)
Accessories
(RM-V2550BU, RM-V2550E)
Power cord ................................................... 1 *4
Control cable ..................................................... 1
Used to control multiple multi projection units.
Hexagonal bolt w/ washer (M8x65) ................ 2
Hexagonal bolt w/ washer (M8x45) ................ 3
Hexagonal nut (M8) .......................................... 5
Light shield (black) ........................................... 4
*1 The RS-232C baud rate is set at 4800 bps upon
shipment from the factory. The setting can be
changed by remote control or from a computer.
*2 Only RGB-1 or RBG-2 can be used (selected by
switch).
*3 NTSC color bar signal input and other adjustment
data as set upon shipment from the factory.
*4 Bolts for connecting the MPJ to a stand are not
included with the MPJ (they are included with the
standard stand)