Pioneer RCS-404H Operating Instructions Manual Download

Page: 16 / 152

Remote control

10 GUIDE

Press to display the GUIDE Plus+™ screen; press again
to exit.

11 HOME MENU

Press to display the Home Menu, from which you can
navigate many the functions of the system.

///

(cursor buttons) and ENTER

Use to navigate all DVD recorder on-screen displays.
Press

ENTER

to select the currently highlighted

option.

C/–

(page 77)

Press to change the channel of the built-in TV tuner.

CM BACK (commercial back)

Press repeatedly to skip progressively backward
through the audio or video playing.

CM SKIP (commercial skip)

Press repeatedly to skip progressively forward
through the audio or video playing.

13 PAUSE LIVE TV

(page 79)

Press to start recording the current TV channel, but with
playback paused, effectively pausing the broadcast.

14 RETURN

Press to go back one level in the on-screen menu or
display.

PREV / NEXT

Press to skip to the previous or next title/chapter/track/
folder; or to display the previous or next menu page.

When GUIDE Plus+™ is displayed, use to display the
previous/next page.

16 /–

Use to adjust the volume.

17 GUIDE Plus+™ Action buttons and DVD playback
function buttons

When in the GUIDE Plus+™ system, these buttons
act as the Red, Green, Yellow and Blue Action
buttons (the functions of these buttons change
according to the GUIDE Plus+™ Area). (page 64)

AUDIO

(page 77, 94)

Press to change the audio language or channel.
(When the recorder is stopped, press to change the
tuner audio.)

SUBTITLE

(page 93)

Press to display/change the subtitles included in
multilingual DVD-Video discs.

ANGLE

(page 94)

Press to switch camera angles on discs with multi-
angle scenes.

PLAY MODE

(page 91)

Press to change the play mode (search, repeat,
program play, etc.)

18 TIMER REC

(page 65)

Press to set a timer recording from the GUIDE Plus+™
system.

(page 91)

Press to start reverse or forward scanning. Press
again to change the speed.

(page 91)

While paused, press and hold to start slow-motion
playback. Press repeatedly to change the playback
speed.

While paused, press to advance a single frame in
either direction.

When GUIDE Plus+™ is displayed, use to display the
previous/next day.

20 REC MODE

(page 77)

Press repeatedly to change the recording mode (picture
quality).

21 ONE TOUCH COPY

(page 106)

Press to start One Touch Copy of the currently playing
title to DVD or the HDD.

22 Number buttons

Use the number buttons for track/chapter/title
selection; channel selection, and so on.

///

(cursor buttons) and ENTER

Use to control receiver functions.

SETUP

Use to access the menu system for surround sound
setup, tuner settings and so on (page 23, 29, 30, 31,
37).

SR+

Use to setup the SR+ features and to select the SR+
mode (page 36).

MCACC

Starts the Auto MCACC setup (page 23).

TEST TONE

Use to output the test tone (for speaker setup)
(page 32).

SURROUND

Use to select a Surround mode (page 25).

SLEEP

Press to set the sleep timer (page 37).

ADVANCED

Use to select a Pioneer original surround mode
(page 26).

Summary of Contents for RCS-404H

























































































































































Search results

Summary of Contents for RCS-404H

Reviews:

Related manuals for RCS-404H

Brands by name

Popular brands

Pioneer RCS-404H, Operating Instructions Manual

Search results

Summary of Contents for RCS-404H

Reviews:

Related manuals for RCS-404H

Brands by name

Popular brands