background image

Additional information

16

145

En

English

About DV

DVR-640H-AV only

Using DV, also known as i.LINK or IEEE 1394-1995, you 
can connect a DV camcorder to this recorder using a DV 
cable for input of audio, video, data and control signals.

“i.LINK” and the “i.LINK” logo are trademarks.

• This recorder is only compatible with DV-format 

(DVC-SD) camcorders. Digital satellite receivers and 
Digital VHS video recorders are not compatible.

• You cannot connect more than one DV camcorder at 

a time to this recorder.

• You cannot control this recorder from external 

equipment connected via the 

DV IN

 jack.

• It may not always be possible to control the 

connected camcorder via the 

DV IN

 jack.

• Digital camcorders can usually record audio as 

stereo 16-bit / 48 kHz, or twin stereo tracks of 12-bit / 
32 kHz. This recorder can only record one stereo 
audio track. Set the 

DV Input

 setting as required (see 

DV Input

 on page 130).

• Audio input to the 

DV IN

 jack should be 32 kHz or 48 

kHz (not 44.1 kHz).

• Picture disturbance in the recording may occur if the 

source component pauses playback or plays an 
unrecorded section of tape, or if the power fails in the 
source component, or the DV cable is disconnected.

• The 

DV IN

 jack is an input only. There is no output 

functionality.

Screen sizes and disc formats

When viewing on a standard TV or monitor

Screen format of disc

Setting

Appearance

16:9

4:3 (Letter Box)

The program is shown in widescreen with black bars at 
the top and bottom of the screen.

4:3 (Pan & Scan)

The sides of the program are cropped so that the picture 
fills the whole screen.

4:3

4:3 (Letter Box)
4:3 (Pan & Scan)

The program is presented correctly on either setting.

When viewing on a widescreen TV or monitor

Screen format of disc

Setting

Appearance

16:9

16:9

The program is presented in widescreen.

4:3

16:9

Your TV will determine how the picture is presented—
check the manual that came with the TV for details.

Summary of Contents for RCS-404H

























































































































































Reviews: