2. SPECIFICATIONS
Motor and Turntable
Drive System .............................................. Direct-drive
Motor .................................................. DC servo motor
Turntable Platter ..... 304 mm diam. aluminum alloy die-cast
Speeds ............................................. 33-1 /3 and 45 rpm
Wow and Flutter .................... Less than *0.014% (WRMS)
0.025% (WRMS)
± 0.035% WTD Peak (DIN)
Values marked with an "*" designate the wow and flutter for
motor, and do not include the cartridge or tonearm load.
Signal-to-Noise-Ratio .................. More than 78 dB (DIN-Bl
(with Pioneer cartridge model PC-300T)
Tonearm
Type ................................... Integrated straight tom ea rm
PC-300T Specifications
Type .............................................................. IM type
Stylus ............................. 0.3 x 0.7 mil diamond (PN-300T)
Output Voltage ................................................. 2.5 mV
(1 kHz, 5 cm/s LAT. Peak)
Tracking Force .................... 1.0 g to 1.5 g (proper 1.25 g)
Frequency Response ................................ 10 to 33,000 Hz
Recommended Load ............................................ 50 kQ
Weight .............................................................. 5.9 g
Su bf unctions
Auto lead-in, auto return, auto cut, repeat
Arm elevation, manual play,
Auto disc size selector, record detection,
Auto speed selector
INFORMATION TO USER
[FOR U.S.A. MODEL]
Miscellaneous
Power Requirements
HEM, HB, HP models ..................... AC 2 20 V /240 V-
(switchable), 50, 60 Hz
KUT, KCT, KU, KC models ................. AC 120 V, 60 Hz
S,
SIG
models ........... AC 110 V/120 V/220 V/240 V-
(switchable), 50, 60 Hz
Power Consumption
HEM, HB, HP models ........................................ 13 W
KUT, KCT, KU, KC models ............................... 12 W
S,S/Gmodels ................................................ 9W
Dimensions ....................... 420 (W) x 108 ( H) x 365 ( D) mm
16-1/2 (W) x4-1/4 (H) x 14-3/8 (D) in.
Weight .................................................... 4.8 kg/11 lb
Accessories
EP Adapter .............................................................. 1
Operating Instructions ................................................ 1
NOTE:
Specifications and design subject to possible modification without
notice, due to improvements.
This equipment generates and uses radio frequency
energy and if not installed and used properly, that is, in
strict accordance with the manufacture's instructions,
may cause interference to radio and television recep
tion. It has been type tested and found to comply with
the limits for a Class B computing device in accordance
with the specifications in Subpart
J
of Part 15 of FCC
Rules, which are designed to provide reasonable protec
tion against such interference in a residential installa
tion. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause interference to radio or
television reception, which can be determined by turn
ing the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
If necessary, the user should consult the dealer or an ex
perienced radio/television technician for additional sug
gestions. The user may find the following booklet
prepared by the Federal Communications Comission
helpful:
reorient the receiving antenna
relocate this component with respect to the
receiver
move this component away from the receiver
plug this component into
.
a different outlet so that
component and receiver are on different branch cir
cuits.
"How to Identify and Resolve Ratio-TV Interference
Problems".
This booklet is available from the US Government Prin
ting Office, Washington, D.C., 20402, Stock No.
004-000-00345-4.
The above instructions apply only to units which will
be operated in the United States.
3