13.3 AJUSTE DE LA ALTURA DEL BRAZO
DE FONOCAPTOR
1. Con la cubierta para el polvo desmontada, insertar dos
chavetas de 6mm (una derecha y una a la izquierda) para
emular la situaci6n en que la cubierta para el polvo y la
base del mecanismo estan conectadas.
2. Poner un disco de 30 cm sabre el plate giratorio, encen
der el aparato, y usando el conmutador de local izaci6n
( .,..,. ) mover el braze de fonocaptor a una distancia de
aproximadamente 100 mm del centre del plate giratorio.
3. Girar el tornillot)hasta que la punta de la aguja este de
5 a 7 mm sabre la superficie del disco.
• Girando el tornillo en el sentido de los punteros del
reloj, se baja la aguja.
• Girando el tornillo en el sentido contrario a los punte·
ros del reloj, se sube la aguja.
local izaci6n
......
C,�
Chavetas de 6mm
Fig. 13-3 Ajuste de la altura del braze de fonocaptor
13.4 AJUSTE DELA VELOCIDAD DEL MOTOR
DEL TOCADISCOS
1. Colocar la hoja de estroboscopia sabre el platillo. Encen
der el conmutador de alimentaci6n y el conmutador de
colocaci6n (.,..,. ) para girar el motor del tocadiscos.
2. lnsertar un destornillador pequefio en el orificio de
ajuste de velocidad situado el en panel inferior, y ajustar
respectivamente V R 1 y V R2.
Fig. 13-4 Ajuste de la velocidad del motor del
tocadiscos
39