Pioneer PDP 507CMX, Service Manual

Page: 170 / 210

PDP-507CMX
170
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Command Operation Remarks
Validity Minimum
Numeric Direct input
Minimum
Last
Memory
SCREEN MASK
FMK
FMKS00
FMKS02
FMKS03
FMKS04
FMKS05
FMKS06
FMKS07
SIDE MASK
RSL
GSL
BSL
SMAS00
SMAS01
VIDEO WALL
MGF
MGFS00
MGFS11
MGFS12
MGFS13
MGFS14
MGFS15
MGP
MGPSnn
IDA
PDES00
PDES01
PDES02
LNKS00
LNKS01
RS - 232C
BRA
BRAS01
BRAS02
BRAS03
BRAS04
BRAS05
BRAS06
ID NUMBER
IDC
IDS
FAN
FCM
FCA
FCU
OSD
OSDS00
OSDS01
OSSS01
OSSS02
OSAS01
OSAS02
FRONT INDICATOR
LESS00
LESS01
O
O
O
000
000
000
255
255
255
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Indicating the setting value on screen mask at present
Turning the screen mask OFF
Turning the screen mask to inverse (negative positive inversion)
Turning the screen mask to white mask
Turning the screen mask to red mask
Turning the screen mask to green mask
Turning the screen mask to blue mask
Turning the screen mask to yellow mask
Adjusting the side mask RED
Adjusting the side mask GREEN
Adjusting the side mask BLUE
AUTO SIDE MASK function OFF
AUTO SIDE MASK function ON
Indicating the setting value on video wall
Turning the video wall OFF
Setting the video wall to DIVIDER : 1
Setting the video wall to DIVIDER : 2 x 2
Setting the video wall to DIVIDER : 3 x 3
Setting the video wall to DIVIDER : 4 x 4
Setting the video wall to DIVIDER : 5 x 5
Indicating the video wall (expansion position/joint consideration on or not)
nn=01~04:DIVIDER= Set display position of 2 x 2 (there is no joint consideration)
nn=05~08:DIVIDER= Set display position of 2 x 2 (there is joint consideration)
nn=10~18:DIVIDER= Set display position of 3 x 3 (there is no joint consideration)
nn=20~28:DIVIDER= Set display position of 3 x 3 (there is joint consideration)
nn=30~3F:DIVIDER= Set display position of 4 x 4 (there is no joint consideration)
nn=40~4F:DIVIDER= Set display position of 4 x 4 (there is joint consideration)
nn=50~68:DIVIDER= Set display position of 5 x 5 (there is no joint consideration)
nn=70~88:DIVIDER= Set display position of 5 x 5 (there is joint consideration)
Executing the auto ID setting
Turning the power-on delay mode OFF
Turning the power-on delay mode ON (except for more than 16 sides systems)
or setting it to mode 1 (for more than 16 sides systems)
Setting the power-on delay mode to mode 2 (for more than 16 sides systems)
Setting the ABL link OFF
Setting the ABL link ON
Indication the setting value on baud rate
Setting the RS-232C baud rate to 1 200 bps
Setting the RS-232C baud rate to 2 400 bps
Setting the RS-232C baud rate to 4 800 bps
Setting the RS-232C baud rate to 9 600 bps
Setting the RS-232C baud rate to 19 200 bps
Setting the RS-232C baud rate to 19 200 bps
Clearing the ID
Clearing the ID
Maximizing the fan roll control
Turning the fan roll control to auto
Set the fan rotation control of integrator to the maximum and limit the luminance.
Turning the OSD display OFF
Turning the OSD display ON
Turning the OSD size to enlarged display
Turning the OSD size to reduced display
Setting the OSD display angle to horizontality
Setting the OSD display angle to verticality
Turning the front indicator OFF
Turning the front indicator ON
[INTEGRATOR] - [OPTION] related command