Pioneer PDK-5001 Technical Manual Download

Page: 42 / 115

42 THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

4.4 Plasma Display Ceiling Suspension Hardware (one-side type):PDK-5002

4.4.1 Specifications

External dimensions .................

1218 (W) x 300 (D) x 1162 (H) mm

(with plasma display in horizontal position)

Weight .......................................

14.6 kg (mounting hardware only)

57.6 kg (mounting ha plasma display)

Adjustable range of angles ......

Horizontal to 25 degrees below horizontal, 45 degrees left/right

Material ......................................

Steel pipe for general material (STK-MR)

Finish ..........................................

Semi-matte black paint

Package dimensions .................

1270 (W) x 725 (D) x 230 (H) mm

Package weight .........................

24.0 kg

Accessories

Monitor mount bolt ........................................... x 6

Flange nut ......................................................... x 6

Hexagonal socket head bolt (M5 x 16) ............. x 1

Hexagonal socket head bolt (M6 x 10) ............. x 1

Hexagonal socket head bolt (M6 x 30) ............. x 1

Hexagonal socket head bolt (M8 x 75) ............. x 2

Hexagonal socket head bolt (M10 x 85) ........... x 2

Flat washer, ø8 ................................................. x 2

Flat washer, ø10 ............................................... x 2

Spring washer, ø8 ............................................. x 2

Spring washer, ø10 ........................................... x 2

Hole cover ......................................................... x 1

Spacer ............................................................... x 1

Pattern .............................................................. x 1

Operating instractions ....................................... x 1

Mount contractor contact form ......................... x 1

The appropriate types of screws and other display/mounting components will depend on the strength and composition

of the ceiling. Prepare them separately.

THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

* Operating Temperature Restrictions

• Ambient temperature: 0 to 40˚C

* Operating Temperature Restrictions for Upside-down Installations

• Ambient temperature: 0 to 35˚C

• Others factors: Maintain sufficient clearance between the display and the wall (at least 300 mm)

Summary of Contents for PDK-5001




















































































































Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands

Pioneer PDK-5001, Technical Manual

Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands