Pioneer PDK-5001 Technical Manual Download

Page: 44 / 115

44 THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

4.4.2 Assembling and installing the mounting hardware, and mounting the plasma display

1) Preparations

You will need the following tools. Make sure you have them at hand before beginning work.

• Wrench or spanner (subtense 12 mm)

• Hexagonal wrench (subtense 4 mm, for M5 bolts)

• Hexagonal wrench (subtense 5 mm, for M6 bolts)

• Hexagonal wrench (subtense 6 mm, for M8 bolts)

• Hexagonal wrench (subtense 8 mm, for M10 bolts)

You’ll also need tools for ceiling work.

2) Assembling and installing the mounting hardware

Confirm that the monitor brackets (left and right) are firmly mounted to the monitor frame and insert the center rod

through monitor frame and the spacer into the post COMP. Secure the post COMP and the center rod with two

hexagonal socket head bolts (M8 x 75).

Tighten the vibration-preventing hexagonal socket head bolt (M5 x 16).

Select the installation site, then apply the supplied pattern to the ceiling, drill the suitable holes, and mount the

ceiling flange COMP. The appropriate types of screws and other display/mounting components will depend on the

strength and composition of the particular ceiling.

Insert the post COMP into the ceiling flange COMP and secure the two with two hexagonal socket head bolts (M10

x 85).

Tighten the vibration-preventing hexagonal socket head bolt (M6 x 10).

• Firmly tighten all bolts.

• After mounting the mounting hardware, but before mounting the plasma display, confirm the strength of the

mount portion of the ceiling.

• For additional safety, use the holes in the ceiling flange COMP, as shown. (Use parts strong enough to support the

weight of the display)

THIS ITEM IS NOT AVAILABLE. PLEASE CONTACT PIONEER FOR INFORMATION

Example:

Securing to a foundation ceiling with

shackle and safety wire.

Ceiling flange COMP

Anchor

Foundation ceiling

Shackle

Safety wire

Bolt

NOTE: Safety wires serve as important backups in keeping the unit securely mounted.

Summary of Contents for PDK-5001




















































































































Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands

Pioneer PDK-5001, Technical Manual

Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands