Pioneer PDK-5001 Technical Manual Download

Page: 71 / 115

Menu Mode

5.3 Menu Mode

5.3.1 About menu mode

1) How to enter/exit Menu mode

• To enter Menu mode and to display the menu screen (refer to “5.3.2. Operation Example in Menu Mode”), press

the MENU button on the remote or on the operating panel of the main unit in normal operating mode. To return to

Normal operating mode, press the MENU button.

2) Remember the following:

(1) You can’t change the input while in Menu mode. Select the input for the adjustment or setting you intend to

perform before entering Menu mode.

(2) Menu mode is cancelled automatically and Normal operating mode restored in the following cases:

• When switching over to another input signal mode (i.e., to another signal frequency)

• When no control is operated for a period of approximately eight minutes

• When the KEY LOCK/UNLOCK button on the operating panel of the main unit is pressed

(3) For adjustments in Menu mode, refer to the operation manual.

(4) When making adjustments, we recommend using video signals that you actually intend to use.

Summary of Contents for PDK-5001




















































































































Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands

Pioneer PDK-5001, Technical Manual

Search results

Summary of Contents for PDK-5001

Reviews:

Related manuals for PDK-5001

Brands by name

Popular brands