Pioneer Kuro Elite PRO-141FD, Service Manual

Page: 99 / 238

99
PRO-141FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
Effective only
in Factory
Mode
Function
Initial
Value
PRO-141FD
PRO-101FD KRP-600M
KRP-500M
Applicable Model Active U-com
MTB MDU
Min. Max.
Command
Name
Last
Memory
Adjustment Range
Q
QAJ Acquiring various adjustment values of the panel side
QAP For acquiring the data on the model name
QIS For acquiring the data on the input setup
QMT For acquiring the data on the optical sensor
QOS For acquiring the data on the optional settings
QPD Acquiring logs of power-down points
QPF Acquiring characteristic / function setting values of the panel side
QPM Acquiring data of the pulse meter
QPI For acquiring the data on the PICTURE settings
QPS For acquiring the data on the SCREEN settings
QPW Acquiring panel white balance adjustment values
QS1 For acquiring the data on versions for various components
QS2 Acquiring data on the status of the unit, such as temperature
QS3 Each information output for panel
QS5 Each information output for panel (individual function)
QSP Acquiring sub-version of the microcomputer for panel
QSD Acquiring data on shutdown
QSI Acquiring data related with signals
QST For acquiring the data on status
QSU For acquiring the data on audio status
QWB For acquiring the data on WHITE BAL
R
R1K *** First reset (wedge width) MOD
R2K *** Second reset (wedge width) MOD
RBL S00-7 BLUE setting for panel degradation correction : Level 0 to 7 MOD
RGL S00-7 GREEN setting for panel degradation correction : Level 0 to 7 MOD
RHI
***
For adjusting R.HIGH (VIDEO signal)
For adjusting Red (PC signal) 000(video)
000(PC)
120(video)
60(PC)
60(video)
30(PC)
MAIN
For sending back the R.HIGH adjustment data (VIDEO signal)
For sending back the Red adjustment data (PC signal)
MAIN
RIP For reading out the IP address
RLC S00 For setting the room light sensor setting to OFF MAIN
S01 For setting the room light sensor setting to ON MAIN
For sending back the data on the room light sensor setting MAIN
RLS S00 Room light sensor operation : OFF
S01-5 Room light sensor operation : 1 to 5
RLW
*** For adjusting R.LOW 000 120 060 MAIN
For sending back the R.Low adjustment data MAIN
RMA For reading out the MAC address from the IP microcomputer
RMC
S00 “0” key on the remote control unit
S01 “1” key on the remote control unit
S02 “2” key on the remote control unit
S03 “3” key on the remote control unit
S04 “4” key on the remote control unit
S05 “5” key on the remote control unit
S06 “6” key on the remote control unit
S07 “7” key on the remote control unit
S08 “8” key on the remote control unit
S09 “9” key on the remote control unit
S10 ”CURSOR RIGHT” key on the remote control unit
S11 ”CURSOR LEFT” key on the remote control unit
S12 ”CURSOR UP” key on the remote control unit
S13 ”CURSOR DOWN” key on the remote control unit
S14 ”SET” key on the remote control unit
S25 ”MENU” key on the remote control unit
S29 ”FREEZE” key on the remote control unit
S30 ”STANDBY/ON” key on the remote control unit
S31 ”VOLUME UP” key on the remote control unit