Pioneer Kuro Elite PRO-141FD, Service Manual

Page: 91 / 238

91
PRO-141FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
Effective only
in Factory
Mode
Function
Initial
Value
PRO-141FD
PRO-101FD KRP-600M
KRP-500M
Applicable Model Active U-com
MTB MDU
Min. Max.
Command
Name
Last
Memory
Adjustment Range
CMT Clearing data of the maximum temperature MOD
CNT *** For adjusting contrast 000 060 040 MAIN
COL *** For adjusting color 000 060 120 MAIN
For sending back the current color adjustment value
CPC Clearing power-on count data MOD
CPD Clearing power-down histrory MOD
CPH *** For adjusting phase (PLL phase) 000 032 063 MAIN
CPM Clearing data of the pulse meter MOD
CSD Clearing shutdown history of Panel side MOD
CSF S00 Color sensor function OFF
S01 Color sensor function ON
CSM S01 Color Space 1: Pioneer's original (panel characteristics) MAIN
S02 Color Space 2: In compliance with EBU standards MAIN
For sending back the data on the current color space MAIN
CSB *** Blue coefficient of color sensor MOD
CSG *** Green coefficient of color sensor MOD
CSR *** Red coefficient of color sensor MOD
CTI
S00 Color temperature setting: For setting CTI to OFF MAIN
S01 Color temperature setting: For setting CTI to ON MAIN
Color temperature setting: For sending back the data on the current CTI MAIN
CTP
S01 For setting color temperature to LOW MAIN
S02 For setting color temperature to MID LOW MAIN
S03 For setting color temperature to MIDDLE MAIN
S04 For setting color temperature to MID HIGH MAIN
S05 For setting color temperature to HIGH MAIN
S06 For setting color temperature to MANUAL MAIN
For acquiring the data on the current color temperature
D
DIT
S01 For displaying DISPLAY CALL 1
S02 For displaying DISPLAY CALL 2
DIP For setting the IP address in the main microcomputer MAIN
DIZ S00 Dither/L dither OFF & noise OFF
S01 Dither/L dither ON & noise ON
S02 Dither/L dither OFF & noise ON
S03 Dither/L dither ON & noise OFF
DOF For turning off the currently displayed on-screen display
DRP S00 For setting DRE Picture to Off MAIN
S01 For setting DRE Picture to Low MAIN
S02 For setting DRE Picture to Mid MAIN
S03 For setting DRE Picture to High MAIN
For sending back the data on the current DRE Picture
DRV S00 For turning off the drive system power
S01 For turning on the drive system power
DW0 For decreasing the adjustment value by 10 MAIN
DWF For setting the adjustment value to minimum MAIN
DWn For decreasing the adjustment value by n (n = 1 to 9)
For setting 3DYC to OFF
For setting 3DYC to LOW
For setting 3DYC to MID
For setting 3DYC to HIGH
For sending back the current 3DYC setting
MAIN
DYC S00 MAIN
S01 MAIN
S02 MAIN
S03 MAIN
E
ENH
S01 For setting Enhancer to 1 MAIN
S02 For setting Enhancer to 2 MAIN
S03 For setting Enhancer to 3 MAIN
For sending back the data on the current Enhancer setting
ESV
S00 For setting power-save to the reference setting MAIN
S01 For setting power-save to Mode 1 (power saving 1) MAIN
S02 For setting power-save to Mode 2 (power saving 2) MAIN
S05 For setting power-save to Video Muting MAIN
For acquiring the data on the current power-saving setting