Pioneer Kuro Elite PRO-141FD, Service Manual

Page: 136 / 238

136
PRO-141FD
1 2 3 4
A
B
C
D
E
F
1 2 3 4
3. Use of the Web Control Function
(Reference) Setting examples when the PDP and PC are directly connected
To access the PDP from the PC via a Web browser, settings are required for both the PDP and PC.
The setting items differ depending on the system environment. Setting examples when the PDP and PC are directly connected,
which is the simplest form of the system, are described below:
<Settings on the PDP>
Select HOME MENU, Control Setup, then IP Control Setting, in that order.
• Set IP Control to Enable.
• Set DHCP to Off.
• Check that the IP address is set to “192.168.123.002.”
• Check that the Subnet mask is set to “255.255.255.000.”
<Settings on the PC>
Open Properties for the Internet protocol (TCP/IP).
• Use the following IP address:
• Set the IP address to “192.168.123.1.”
• Set the Subnet mask to “255.255.255.0.”
Start up Internet Explorer.
• Enter http://(IP address of the PDP) (http://192.168.123.2/).
• On the password input screen, enter “admin.”
Note: If any setting is changed on the PDP, restore the original setting after servicing is finished.
PDP
PC
LAN cable
(straight)