Pioneer Kuro Elite PRO-141FD, Service Manual

Page: 141 / 238

141
PRO-141FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
[4] REMOTE CONTROL CODE IN SERVICE FACTORY MODE
Remote Control Keys Main function Remarks
j
(DOWN)
For moving the cursor To move the cursor to lower items
i
(UP) For moving the cursor To move the cursor to upper items
k
(LEFT)
For moving the cursor, decreasing the set value, or
changing the setting To decrease an adjustment value or change the setting of
a selected item
l
(RIGHT)
For moving the cursor, increasing the set value, or
changing the setting To increase an adjustment value or change the setting of a
selected item
INPUT For selecting the inputs (The inputs change cyclically.) To change the inputs cyclically
INPUT 1 to 8 For selecting the inputs
To directly select an input (1-8). INPUT 7 and INPUT 8 are
available only for the Elite models.
P/CH+ For changing pages
P/CH- For changing pages
POWER ON/OFF
FACTORY (Note 2)
For turning the power off To turn the power off
For turning the Factory menu on or off To turn the Factory menu on or off
DRIVE OFF (Note1) For turning the panel drive off To turn the drive off
To move to the previous page
To move to the next page
Note 1: If you wish to turn the unit on with the drive off, press the DRIVE OFF key then within 10 seconds press the POWER ON/OFF key.
If the unit is left unoperated 10 seconds or more after the DRIVE OFF key is pressed in Standby mode, the Drive Off command will
become invalid.
Note 2: Upon opening of the Factory menu, Page 11 is displayed.
Key functions of the remote control unit on the FACTORY MENU are shown in the table below.
For details on key functions of the remote control unit in PANEL FACTORY, see “Remote Control Codes in Panel Factory
Mode” in “6.2[2] PANEL FACTORY (+).”
Supplied
remote control PDP service
remote control