Pioneer Kuro Elite PRO-141FD, Service Manual

Page: 203 / 238

203
PRO-141FD
5 6 7 8
5 6 7 8
A
B
C
D
E
F
Set VOL YNOFSA D to the current setting value minus 44. / [VYF
∗∗∗
]
Gradually decrease the VOL YNOFSA D value until disappear the
discharge (lit cell).
The tentative setting value of VOL YNOFS1 D + current setting
value of VOL YNOFSA D must be 192 or greater.
Replacement of abnormal circuits or
re-replacement of the panel required
Replacement of abnormal circuits or
re-replacement of the panel required
No
Yes Tentative setting value of VOL YNOFS1 D
+ current setting value of VOL YNOFSA D
< 194?
Display RST MASK 19 (Green 718+). / [MKR S19]
Display RST MASK 18 (Red 626+). / [MKR S18]
No
Set VOL YNOFSA D to the current setting value plus 32. / [VYF
∗∗∗
]
Determine the current VOL YNOFSA D setting value as the final value.
Yes
Recovery flowchart (2-3)...Changing the VOL YNOFSA D setting
[From the Main flowchart (2)]
RST MASK 23 (Magenta 169)
Is there erroneous discharge (abnormal dead cell)?
(Check on the PANEL 1-ADJ menu.)
Replacement of abnormal circuits or
re-replacement of the panel required
No
Yes
Is there erroneous discharge (abnormal dead cell)?
(Check on the PANEL 1-ADJ menu.)
[To the Main flowchart (2)]