manualshive.com logo in svg

Pioneer Elite VSX-LX105, Instruction Manual, Page: 98 / 168

Share
Download
Pioneer Elite VSX-LX105 Instruction Manual Download Page 98

98

Setup

System Setup

Menu list

Input/Output Assign TV Out / OSD

Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.

p100

HDMI Input

Change input assignment between the input selectors and HDMI IN jacks.

p102

Digital Audio Input

Change input assignment between the input selectors and DIGITAL AUDIO IN COAXIAL/

OPTICAL jacks.

p102

Analog Audio Input

Change input assignment between the input selectors and AUDIO IN jacks.

p103

Input Skip

You can skip inputs to which nothing is connected when selecting them with the INPUT 

SELECTOR dial on the main unit or with the INPUT SELECT button on the remote controller.

p103

PERSONAL PRESET Information

Confirm the registered contents of 1 to 3 buttons of PERSONAL PRESET.

p104

Speaker

Configuration

Change the settings of connection environment of the speakers.

p105

Crossover

Change the settings of crossover frequencies.

p106

Distance

Set the distance from each speaker to the listening position.

p107

Channel Level

Adjust the volume level of each speaker.

p107

Dolby Enabled Speaker

Change the settings of Dolby Enabled Speakers.

p108

Speaker Virtualizer

The Speaker Virtualizer function can be switched between On and Off.

p108

Audio Adjust

Dual Mono/Mono

Change the settings of multiplex audio playback.

p109

Dolby

Change the setting of when Dolby signals are input.

p109

DTS

Change the setting of when DTS signals are input.

p109

Volume

Change the Volume settings.

p110

Source

Input Volume Absorber

Adjust the volume level when there are differences in volume level among multiple devices 

connected to this unit.

p111

Name Edit

Set an easy name for each input.

p111

Audio Select

Select the priority for input selection when multiple audio sources are connected to one input 

selector.

p111

Summary of Contents for Elite VSX-LX105









































































































































































Reviews:

No comments