Pioneer Elite VSX-LX105 Instruction Manual Download

Page: 119 / 168

119

Setup

Miscellaneous

Tuner

Change the settings for Tuner.

AM/FM Frequency Step (Default Value: 10 kHz/0.2 MHz)

Select a frequency step to suit your residential area.

Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz".

• When this setting is changed, all radio presets are deleted.

Remote ID

Change the remote controller ID.

Remote ID (Default Value: 1)

Select an ID for the unit's remote controller from "1", "2", and "3" to prevent

interference between the unit and other Pioneer components that are installed

in the same room. After changing the ID on the main unit, change the ID on the

remote controller accordingly with the following procedure.

While pressing and holding the MODE button, press the following buttons for

approx. 3 seconds.

• To change the remote controller ID to "1": AUTO/DIRECT

• To change the remote controller ID to "2": SURR

• To change the remote controller ID to "3": STEREO

Firmware Update

Change the settings for Firmware Update.

Update Notice (Default Value: Enable)

Availability of a firmware update is notified via network.

Enable

Notify updates

Disable

Do not notify updates

Version (Default Value: -)

The current firmware version is displayed.

Update via NET (Default Value: -)

Press ENTER to select when updating the firmware via network.

• This setting cannot be selected if you do not have Internet access or there is

no updatable firmware.

Update via USB (Default Value: -)

Press ENTER to select when updating the firmware via USB.

• This setting cannot be selected if a USB storage device is not connected or

there is no updatable firmware in the USB storage device.

• Wait for a while if "Firmware Update" cannot be selected. It can be selected

when the network function is activated.

Summary of Contents for Elite VSX-LX105









































































































































































Search results

Summary of Contents for Elite VSX-LX105

Reviews:

Related manuals for Elite VSX-LX105

Brands by name

Popular brands

Pioneer Elite VSX-LX105, Instruction Manual

Search results

Summary of Contents for Elite VSX-LX105

Reviews:

Related manuals for Elite VSX-LX105

Brands by name

Popular brands