Pioneer Elite VSX-LX105 Instruction Manual Download Page 126

Page: 126 / 168

126

Setup

Network

• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure

the setting automatically. ("Enable" is set by default) To assign fixed IP

addresses to each components, you must set "DHCP" to "Disable" and

assign an address to this unit in "IP Address" as well as set information

related to your LAN, such as Subnet Mask and Gateway.

Wi-Fi (Default Value: Off(Wired))

Connect the unit to the network via a wireless LAN router.

• When switching between "On" and "Off(Wired)", stop the Network service.

Also, when group playback is in process, cancel the group playback once, and

then switch the setting.

Wireless LAN connection

Off(Wired)

Wired LAN connection

Wi-Fi Setup (Default Value: -)

You can configure wireless LAN settings by pressing ENTER when "Start" is

displayed.

Wi-Fi Status (Default Value: -)

The information of the connected access point will be displayed.

SSID

SSID of the connected access point.

Signal

Signal strength of the connected access point.

Status

Status of the connected access point.

MAC Address (Default Value: -)

Check the MAC address of this unit.

This value is specific to the component and cannot be changed.

DHCP (Default Value: Enable)

Enable

Auto configuration by DHCP

Disable

Manual configuration without DHCP

• If you select "Disable", you must set "IP Address", "Subnet

Mask", "Gateway", and "DNS Server" manually.

IP Address (Default Value: 0.0.0.0)

Displays/Sets the IP address.

Subnet Mask (Default Value: 0.0.0.0)

Displays/Sets the subnet mask.

Gateway (Default Value: 0.0.0.0)

Displays/Sets the gateway.

DNS Server (Default Value: 0.0.0.0)

Displays/Sets the primary DNS server.

Summary of Contents for Elite VSX-LX105









































































































































































Search results

Summary of Contents for Elite VSX-LX105

Reviews:

Related manuals for Elite VSX-LX105

Brands by name

Popular brands

Pioneer Elite VSX-LX105, Instruction Manual

Search results

Summary of Contents for Elite VSX-LX105

Reviews:

Related manuals for Elite VSX-LX105

Brands by name

Popular brands