Pioneer Elite VSX-90TXV Operating Instructions Manual Download Page 71

Page: 71 / 78

Additional information

XM radio messages

SIRIUS radio messages

Note

• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug

from the outlet and insert again to return to normal operating conditions.

Symptom

Cause

Action

Check Antenna

The XM antenna is not connected.

Check that the XM antenna cable is attached securely.

XM ANT ERR

A short-circuit occurring in the antenna or
surrounding antenna cable.

Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off then back on again.

Updating

The radio is being updated with the latest
encryption code.

Wait until the encryption code has been updated. Channels 00
and 01 should function normally.

No Signal

The XM signal is too weak at the current location.

n/a

Loading

The receiver is acquiring audio or program
information.

Wait until the information has been received.

Off Air

The channel currently selected has stopped
broadcasting.

Select another channel.

CH– – –

You have selected a channel that does not exist,
or that you have not subscribed to.

The receiver will automatically switch to channel 001 (or the
last selected channel).

– – – – – – – –

There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.

No action needed.

Symptom

Cause

Action

Antenna Error

Antenna is not properly connected.

Check that the antenna cable is attached securely.

Check Sirius Tuner

SIRIUS Connected tuner is not properly
connected.

Check that the 8 pin mini DIN cable and AC Adapter are
attached securely.

Acquiring Signal

The SIRIUS signal is too weak at the current
location.

n/a

Subscription Updating

Unit is updating subscription.

Wait until the encryption code has been updated.

Updating Channels

Unit is updating channels.

Wait until the encryption code has been updated.

Invalid Channel

Selected channel is not available/does not exist. Select another channel.

VSX-90TXV_KU.book Page 71 Friday, March 16, 2007 5:46 PM

Summary of Contents for Elite VSX-90TXV















































































Search results

Summary of Contents for Elite VSX-90TXV

Reviews:

Related manuals for Elite VSX-90TXV

Brands by name

Popular brands

Pioneer Elite VSX-90TXV, Operating Instructions Manual

Search results

Summary of Contents for Elite VSX-90TXV

Reviews:

Related manuals for Elite VSX-90TXV

Brands by name

Popular brands