Pioneer DVR-560H-S, Service Manual

Page: 62 / 177

45
DVR-660H-K
5 6 7 8
5 6 7 8
A
B
C
D
E
F
OSD Filter Setting
OSD FILTER : 4
• While the User Operation screen is displayed, press the then keys, then the
key four times, in that order.
• While su
b screen 3 of the first screen is displayed, press the key.
[How to enter]
Press the key.
[How to q uit]
ESC DISP
DIG/A N A
ESC
Depending on the monitor used, the character flicker on the OSD may stand out.
If a system, such as character flicker, appears on the monitor, select the filter response.
[Purpose]
DIG/A N A
[Settin g procedures]
Display su b screen 4.
Select the setting from the key operation ta b le.
[Tips]
As the setting value b ecomes greater, jitter is reduced on a CRT display. However, as lines for characters appear thick,
complex characters may b ecome difficult to read. On the contrary, as the setting value b ecomes smaller, jitter
increases on a CRT display. However, as lines for characters b ecome sharper, complex characters b ecome more
legi b le.
N ote: Use the remote control unit for servicing.
N ote: A new setting b ecomes active as soon as it is made. As a new setting is stored in nonvolatile memory, it will b e
retrieved when the unit it turned on the next time.
N ote: After the factory-preset values are downloaded, the setting value for the OSD Filter will b e the default value (4).
Su b screen 4
[Tools to be used]
Remote control unit for servicing
(GGF13 8 1)
[(Table 2) Key operation of OSD Filter settin g ]
Key Operation Setting value Remarks
0 - 4 (Default value: 4)
[ Rev x 3 ], [SPEED+]
[ x 3 Fwd], [SPEED-]
[ Rev x 3 ], [SPEED+]
: The setting value increases b y 1.
[ x 3 Fwd ], [SPEED-]
: The setting value decreases b y 1.
Changing the setting value for the
OSD Filter
The setting value is reset to default.
[ESC]
[CLEAR]
–
–
To exit the OSD Filter Setting and
clear the screen (Appears the tuner
screen.)
–
[4] OSD Filter Settin g (Subscreen 4)