Getting started
04
32
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
If you’re using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
1
Switch on your TV and set the video
input to this recorder.
2
Switch on the recorder.
When you switch on for the first time, your
TV should display the Setup Navigator
screen (If the Setup Navigator doesn’t
appear, you can also access it from the
Initial Setup menu; see page 132).
• If this recorder is connected to a
compatible TV using a fully-wired 21-pin
SCART cable, the recorder will take a few
seconds to download country, TV screen
size and language information. (Check
the manual that came with your TV for
compatibility information.)
3
Choose a language (then
press ENTER).
4
Start the Setup Navigator.
• If you don’t want to use the Setup
Navigator, press
to select
Cancel
,
then press
ENTER
to exit the Setup
Navigator.
5
Select the Auto Channel
Setting (‘Auto Scan’ or ‘Download from
TV’), or ‘Do not set’.
STANDBY/ON
ENTER
Initial Setup
Basic
Tuner
Video In/ O ut
A udio In
A udio O ut
Language
Re co rding
Playback
Clock Setting
Input Line Syst em
Pow er Save
HELPp
Setup N avig at or
Setup N avig at or
Language
Basic
ENTER
k Setting
t Line System
er Save
P
p Navigator
p Navigator
Start
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
ENTER
k Setting
Line System
er Save
P
p Navigator
p Navigator
Auto Channel Setting
English
Download from TV
Do not Set
Auto Scan
DVR645H_WY_EN.book 32 ページ ２００６年７月５日 水曜日 午前１０時２５分
