DV-59AVi
95
5
6
7
8
5
6
7
8
C
D
F
A
B
E
7.1.9 DISASSEMBLY
1
Remove the bonnet by removing the nine screws.
(for DV-59AVi and DV-868AVi-S)
Remove the bonnet by removing the five screws.
(for DV-668AV-S)
2
Press the STANDBY/ON button to turn on the
power.
3
Press the
0
button to open the tray.
4
Remove the tray panel.
5
Press the
0
button to close the tray.
6
Press the STANDBY/ON button to turn off the
power.
Bonnet and Tray Panel
1
Diagnosis of the PCBs
1
Remove the four screws.
2
Remove the two earth lead by removing the two
screws.
3
Disconnect the one connector. (DV-868AVi-S only)
4
Remove the six hooks.
5
Remove the front panel section.
Front Panel Section
2
2 6
3
3
5
5
1
1
1
4
4
2
2
3
Tray panel
Tray
Note 2 :
For performing the diagnosis shown below, the following jigs for service are required:
• GGF1157 • GGF1430
Note 1 :
Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
1
4
4
4
4
4
Bottom view
Front panel section
DV-868AVi-S only
CN301
5