DV-59AVi
149
5
6
7
8
5
6
7
8
C
D
F
A
B
E
Pin Name
Pin No
I/O
Description
HSDI_60958_OUT
179
O
60958 Data Output
This signal is also used as FLWCTRL_DVALID in Flow
Control Data Valid mode.
HSDI0_60958_IN
136
I
60958 Data Input.
HSDI0_AMCLK_IN
137
I
Audio Master Clock Input. This clock is used to decode the bi-
phase encoding of 60958 data.
This pin is also used to input the 1.5*BCLK for Flow Control
mode.
HSDI0_AV
140
O
HSDI Port 0 Available. Programmable. Default active low.
For receive from 1394, this signal indicates if a 1394 packet is
available in the receive buffer for reading. The HSDI_AV
signal for MPEG2 data also depends on time stamp based
release.
For transmit onto 1394, this signal can be used to indicate
buffer level in HSDI TX mode 8 and 9 by programming a CFR.
If the buffer level is above a programmed level, HSDI_AV will
be asserted.
HSDI0_CLK
138
I
HSDI Port 0 Clock. Programmable. Default rising edge
sample. This clock is used to operate the HSDI port 0 logic.
In parallel mode, the maximum clock is 27MHz. In serial
mode, the maximum clock is 70MHz.
This signal is output to HSDI1_CLK in pass thru mode.
This signal can be used as HSDI0_MLPCM_BCLK for DVD-
Audio Transmit.
HSDI0_D0
143
I/O
HSDI Port 0 Data 0 Pin. Data 0 is the least significant bit on
the HSDI data bus.
In serial mode, only HSDI0_D0 is used.
This signal is output to HSDI1_D0 in pass thru mode.
This signal can be used as HSDI0_MLPCM_D0 for DVD-
Audio Transmit.
HSDI0_D1
144
I/O
HSDI Port 0 Data 1 Pin
This signal is output to HSDI1_D1 in pass thru mode.
This signal can be used as HSDI0_MLPCM_D1 for DVD-
Audio Transmit.
HSDI0_D2
147
I/O
HSDI Port 0 Data 2 Pin
This signal is output to HSDI1_D2 in pass thru mode.
This signal can be used as HSDI0_MLPCM_D2 for DVD-
Audio Transmit.
HSDI0_D3
148
I/O
HSDI Port 0 Data 3 Pin
This signal is output to HSDI1_D3 in pass thru mode.
This signal can be used as HSDI0_MLPCM_A for DVD-Audio
Transmit.
HSDI0_D4
149
I/O
HSDI Port 0 Data 4 Pin
This signal is output to HSDI1_D4 in pass thru mode