Pioneer DJM-1000, Service Manual

Page: 164 / 168

DJM-1000
164
1 2 3 4
1 2 3 4
C
D
F
A
B
E
8. Channel 2 input selector switch
SOUND 2:
Dedicated input for DJ CD players supporting digital link
(mini DIN connector).
LINE:
Phone type connector (when a monaural signal is
connected to only the L channel, the signal is input to both
L and R channels).
CD/LINE:
RCA type connector with line level input.
PHONO:
RCA type connector with phono level input.
9. Channel 3 input selector switch
DIGITAL:
RCA type connector with coaxial cable digital input.
LINE:
Phone type connector (when a monaural signal is
connected to only the L channel, the signal is input to both
L and R channels).
CD/LINE:
RCA type connector with line level input.
PHONO:
RCA type connector with phono level input.
10. Channel 4 input selector switch
DIGITAL:
RCA type connector for coaxial cable digital input.
LINE:
Phone type connector (when a monaural signal is
connected to only the L channel, the signal is input to both
L and R channels).
CD/LINE:
RCA type connector with line level input.
PHONO:
RCA type connector with phono level input.
11. Channel 5 input selector switch
DIGITAL:
RCA type connector for coaxial cable digital input.
SUBMIC:
Phone type connector for sub microphone input (monaural).
CD/LINE:
RCA type connector with line level input.
PHONO:
RCA type connector with phono level input.
12. Channel 6 input selector switch
DIGITAL:
RCA type connector for coaxial cable digital input.
SUBMIC:
Phone type connector for sub microphone input (monaural).
CD/LINE:
RCA type connector with line level input.
PHONO:
RCA type connector with phono level input.
13. Channel 1-6 TRIM adjustment dials
Adjusts each channel's input level.
(Adjustable range: -
∞
to +9 dB, approaches 0 dB at mid-
point)
14. Channel equalizer high-range sound adjust dials
(EQ HI)
Adjusts each channel's high-range sound.
(Adjustable range: -26 dB to +6 dB)
15. Channel equalizer mid-range sound adjust dials
(EQ MID)
Adjusts each channel's mid-range sound.
(Adjustable range: -26 dB to +6 dB)
16. Channel equalizer low-range sound adjust dials
(EQ LOW)
Adjusts each channel's low-range sound.
(Adjustable range: -26 dB to +6 dB)
17. Channel level indicators
Displays each channel level. The display provides 2
seconds peak hold.
18. Headphone CUE button/indicators
The selected source to be monitored by headphones is
chosen by pressing the CUE button for RETURN 1,
RETURN 2, channel 1-6, or MASTER. When multiple
buttons are pressed at once, the selected audio sounds are
mixed. When a button is pressed again, the selection is
canceled. The buttons of unselected sources light dimly,
and the buttons of the selected sources light brightly.
Fader control section
19. Curve adjust channel fader dial
(CURVE ADJUST CH FADER)
Adjusts the curve characteristics of the channel fader.
20. Curve adjust cross fader dial
(CURVE ADJUST CROSS FADER)
Adjusts the curve characteristics of the cross fader.
21. CROSS FADER ASSIGN switches/indicators
Selects which side of the cross fader the output from each
channel is directed to. (When multiple channels have been
selected in the same side, the combined sum is assigned to
that side.)
A:
The channel output is directed to the A side (left side) of the
cross fader. The A indicator will light.
THRU:
The channel output is directed to the master output without
going through the cross fader. Both A and B indicators will
go out.
B:
The channel output is directed to the B side (right side) of
the cross fader. The B indicator will light.
22. Cross fader assign A indicator (A)
Lights orange when power is ON.
23. Cross fader slider
The audio directed to either the A side or B side by the
CROSS FADER ASSIGN switch for each channel is output
in accordance with the cross fader curve set by the CURVE
ADJUST dial (CROSS FADER).