Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Pausing MP3/WMA/AAC/
WAV playback
Pause lets you temporarily stop playback of
the MP3/WMA/AAC/WAV.
1 Use MULTI-CONTROL to select Pause.
Pause
appears in the display.
2 Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
#
To turn pause off, press
MULTI-CONTROL
again.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
Compression.
Compression
appears in the display.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Press
MULTI-CONTROL
repeatedly to switch
between the following settings:
COMP/BMX OFF
COMP 1
COMP 2
COMP/BMX OFF
BMX 1
BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use MULTI-CONTROL to select
Search mode.
Search mode
appears in the display.
2 Press MULTI-CONTROL to select the
search method.
Press
MULTI-CONTROL
until the desired
search method appears in the display.
!
FF/REV
Fast forward and reverse
!
Rough search
Searching every 10
tracks
Searching every 10 tracks in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
1 Select the search method Rough search.
Refer to
Selecting the search method
on this
page.
MP3/WMA/AAC/WAV Player
En
27
English
Section
06