Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use MULTI-CONTROL to select
Scan mode.
Scan mode
appears in the display.
2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3When you find the desired track press
MULTI-CONTROL to turn scan play off.
The track will continue to play.
#
If the display has automatically returned to
the playback display, select
Scan mode
again by
using
MULTI-CONTROL
.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Use MULTI-CONTROL to select Pause.
Pause
appears in the display.
2 Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
#
To turn pause off, press
MULTI-CONTROL
again.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions has
a two-step adjustment. The COMP function
balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
Compression.
Compression
appears in the display.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Press
MULTI-CONTROL
repeatedly to switch
between the following settings:
COMP/BMX OFF
COMP 1
COMP 2
COMP/BMX OFF
BMX 1
BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use MULTI-CONTROL to select
Search mode.
Search mode
appears in the display.
2 Press MULTI-CONTROL to select the
search method.
Press
MULTI-CONTROL
until the desired
search method appears in the display.
!
FF/REV
Fast forward and reverse
!
Rough search
Searching every 10
tracks
Built-in CD Player
En
20
Section
05
